Winch Pawl Improvement Kit, 5227

This kit is used to replace 04500 ratchet pawl.

Instructions Read:

Drill 1/8" hole through handle 3-3/8" up from 3/8" pawl bolt hole.  Insert long hook end of spring into this hole and short end into pawl.  Assemble 3/8" x 1" bolt, flat washer, bushing and pawl onto handle as shown in above drawing.  Tighten bolt into handle and tighten locking nut on back side.

For the Ratchet Pawl Only see 05450

For a King Pin Kit see Item 0173KIT